Voodoo13 Accord/TL/TSX Rear Camber/Toe/Trailing Arm Set
Voodoo13 complete 3 arm kit for the 2008+ Honda Accord and 2009-2014 Acura TSX/TL gives you the ultimate in adjustment for fine tuning the rear suspension. If you’re looking to adjust rear camber by more than 1 degree then you must upgrade to a complete 3 arm kit due to the factory arms not providing enough adjustment.
Our arms are engineered and designed for high performance street and race vehicles. They replace the soft rubber OE bushings with rigid spherical bearings for increased handling and performance, but may slightly sacrifice noise and comfort compared to arms that use rubber bushings. The adjusting rods are made from 6061-T6 aluminum which ensures our arms are incredibly strong and lightweight. MIL-A-8625 Type III Hard Anodize finish is available in two colors Hard Clear and Hard OD Green. Our steel brackets are CNC manufactured with TIG welded construction. CNC stainless steel spacers are machined in house and work in conjunction with high quality made in the USA QA1 spherical rod ends. Class 10.9 zinc coated nuts included to replace the factory welded on nuts (camber and trailing arms).
- Includes rear camber, toe and trailing arms
- High strength 6061-T6 aluminum adjusting rod
- MIL-A-8625 Type III hard anodize finish
- CNC stainless steel spacers
- QA1 spherical rod ends with self-sealing and self-lubricated Nylon/PTFE injection molded race that keeps out dirt and debris
- Brake line bracket included (13+ Accord does not require a bracket)
+3.5 to -2.5 degrees camber with all 3 arms
All of our products are engineered, manufactured, and assembled at our Gilbert, Arizona facility using only the best materials from US suppliers.
Our arms are proudly engineered, designed and manufactured in the USA with high performance street and race vehicles in mind. Increased handling and performance are achieved by replacing the soft rubber OE bushings with rigid spherical bearings. This replacement significantly improves handling while only slightly sacrificing noise and comfort compared to arms that use rubber bushings instead. The adjusting rods are made from 6061-T6 Aluminum which ensures incredibly strong, yet lightweight, arms and our steel brackets are CNC manufactured with TIG welded construction. In addition, CNC Stainless Steel Spacers are machined in-house and work in conjunction with high quality, made in the USA, QA1 Spherical Rod Ends. Included with the kit are class 10.9 Zinc coated nuts to replace the factory welded-on nuts on camber and trailing arms.
MIL-A-8625 Type III Hard Anodize finish is available in two colors, Hard Clear and Hard OD Green.
- Includes Rear Camber, Toe and Trailing Arms
- Adjusting Rod made from High-Strength 6061-T6 Aluminum
- MIL-A-8625 Type III Hard Anodize Finish available in two colors, Hard Clear and Hard OD Green
- CNC Stainless Steel Spacers
- QA1 Spherical Rod Ends with self-sealing and self-lubricated Nylon/PTFE injection molded race keeps out road contaminants, dirt and debris
- Brake Line Bracket Included (Note: 13+ Honda Accord does not require a bracket)
+3.5 to -2.5 Degrees camber with all 3 arms
All Voodoo13 products are proudly engineered, manufactured, and assembled at our facility in Mesa, Arizona using only the highest quality materials sourced from US suppliers.
Install Time: 2 hours Limited Lifetime Warranty Made in the USA
|Dimensions||22 × 9 × 3 in|
Raw, Hard OD Green, Hard Clear (Grey)